Service 01 — Onalaska, WI
Garage Floor Epoxy in Onalaska
Durable epoxy coating for garage floors — resists hot tire pickup, stains, and chipping.
Your garage floor takes more abuse than almost any other surface in the house — hot tires, dropped tools, salt and gravel tracked in all winter. A properly installed epoxy system turns bare or painted concrete into a surface that shrugs all of that off, stays easy to clean, and actually looks finished.
We prep every floor the same way regardless of budget: full mechanical grinding down to bare concrete, not just an acid etch, because that's what actually makes a coating last instead of peeling in two winters.
How it works
- 01
Surface prep
Diamond grinding or acid etching to properly profile the concrete for adhesion.
- 02
Repair & prime
Cracks and pits filled, primer coat applied.
- 03
Base coat + flake or color
Epoxy base applied, decorative flake or solid color broadcast if selected.
- 04
Topcoat & cure
Protective topcoat applied; floor cures before vehicle traffic.
Recent project
Two-car garage full flake system, Onalaska
Ground down an old peeling paint coating to bare concrete, repaired several cracks along the slab seams, and installed a full-broadcast flake system with a polyaspartic topcoat — done in a day and a half, ready for vehicle traffic within 48 hours.
Building for Onalaska
- –Much of Onalaska's housing went up in the last few decades, so the slabs we coat here are usually sound and relatively new — that means less repair work, and it also means catching the floor before a winter of salt and hot tires has a chance to pit it.
- –Three-stall attached garages are common in these subdivisions, and the larger the floor, the more a full-broadcast flake system pays off: it hides everyday grit far better than solid color over that much square footage.
- –Attached, often heated garages cure predictably year-round, so Onalaska jobs are some of the easiest to schedule in the middle of a Wisconsin winter.
Color catalogue
Choose your flake blend.
Nine proven blends, available across every coating service.
Domino
Tidal Wave
Gravel
Creekbed
Outback
Shoreline
Wombat
Orbit
Nightfall
Colors can vary by screen, lighting, broadcast density, and topcoat. View a physical sample before making your final selection.
Signs you might need this
- –Bare or painted concrete that's chipping, staining, or dusting
- –Hot tire marks or peeling from a prior coating
- –Cracks or pitting in the slab
What affects the price
- –Garage square footage
- –Condition of existing concrete (cracks, prior coatings to remove)
- –Solid color vs. flake vs. metallic finish
Get a quote for garage floor epoxy in Onalaska.
Free estimates, no pressure. We'll walk the site and give you a straight answer.
Garage Floor Epoxy in Onalaska — questions people ask
How long does epoxy take to cure before I can park in the garage?
Most floors are ready for light foot traffic the next day and full vehicle traffic within 24-72 hours, depending on the topcoat we use. We'll give you an exact timeline before we start.
Can epoxy go over an existing painted floor?
Usually no — old paint or a prior coating needs to be mechanically ground off first. Coating over it is the #1 reason DIY epoxy jobs peel within a year, so we always start from bare concrete.
Garage Floor Epoxy in other areas
Free quote
Tell us about your floor.
Send the details and we'll follow up. Free estimates.
(608) 633-4920- Free Estimates
- Western WI
- Sparta Based